Flame retardant system: Using phosphorus and nitrogen as main flame retardant elements
Main application: Home appliance shell, coil bobbin, controller shell, electronic and electrical products, etc
Flammability rating: UL 94 V0
Glow Wire Grade: GWIT:775/3.0 and GWFI: 850/3.0
Features: Low density, low smoke generation, high flame retardant efficiency; high toughness, and cold resistance.
PS：We can provide you with free samples for evaluation and test, please feel free to contact us
Product Introduction: The flammability of 5000C can reach UL94 V-0 (1.5mm and 3.0mm). 5000C has UL certificate and meets the requirements of RoHS, SVHC, PFOS&PFOA, 17P, and PAHs, etc. 5000C has the characteristics of low density, low smoke generation, high flame retardant efficiency; high toughness, and cold resistance.
Application: Home appliance shell, coil bobbin, controller shell, electronic and electrical products, etc.
Multiple certification guarantee
IATF16949:2016 Certification, etc.
Flame retardant performance: Phosphorus and nitrogen as the flame retardant elements.
Temperature: GWIT:775/3.0mm and GWFI: 850/3.0mm
Characteristic: low density, low smoke generation, high flame retardant efficiency; high toughness and cold resistance
|Specification||Test Method||Unit||Cold resistant and high toughness HFFR PP|
|Density||ASTM D 792||g/cm3||1.10±0.02|
|Melt Flow Index (230℃/2.16kg)||ASTM D 1238||g/10min||12|
|Mold shrinkage||ASTM D 955-08||%||1.1-1.4|
|Tensile Strength||ASTM D 638||MPa||20|
|Elongation at break||ASTM D 638||%||50|
|Bending strength||ASTM D 790||MPa||30|
|Flexural modulus||ASTM D 790||MPa||2000|
|Izod notched impact strength||ASTM D 256||J/m||30|
|Flame retardant performance||UL 94||1.5mm||V-0|
|Glow wire||IEC 60695-2-13||GWIT:775/3.0||Pass|
Remark: The above laboratory test data are just for reference only; it's not a basis for quality assurance.
New energy battery shell
Dear customers, no need to worry about your products colors, POLYROCKS has professional colour matching department, providing free colour matching service. Any colour requirements, kindly please contact us by email: firstname.lastname@example.org.
POLYROCKS focus on provide prompt pre/after-sales service, we have professional injection molding engineers and technical service engineers to provide accurate information and timely service. Any questions or needs, you are welcome to contact us by email: email@example.com.
Any purchasing questions, welcome to contact our customer service, helps will be provided by them.
Copyright © POLYROCKS CHEMICAL CO., LTD. All Rights Reserved | Sitemap | Powered by
QUICK ENQUIRE FORM
* Indicate Mandatory fields