Flame retardant system: Using bromine and antimony as flame-retardant elements.
Main application: Electrical products shell, communication equipment, etc.
Flammability rating: UL 94 V0
Features: Not easy to yellowing, heat-resistant oxidation, high low-temperature toughness; good flame-retardant performance, high temperature resistance.
PS：We can provide you with free samples for evaluation and test, please feel free to contact us
Products Introduction: 2002A flame retardant PC/ABS alloy flammability can reach UL 94 V-0(1.5mm). 2002A flame retardant PC/ABS alloy has passed UL certification, and meet the requirements of RoHS、SVHC、17P、PAHs, etc. 2002A flame retardant PC/ABS alloy does not corrode the mold; not easy to yellowing, heat-resistant oxidation, high low-temperature toughness; good flame-retardant performance, high temperature resistance.
Application: Electrical products shell, communication equipment, etc.
Multiple certification guarantee
IATF16949:2016 Certification, etc.
Flame retardant performance: Environmental bromine antimony flame retardant system
Temperature: GWFI 960/3.0mm
Characteristic: Good flame retardant performance, good heat resistance, high gloss, etc.
|Properties||Test Standards||Units||Heat resistant and flame retardant PC/ABS Alloy|
|Mold Shrinkage||ASTM D955-08||%||0.5-0.7|
|Melt Index(260℃/3.8kg)||ASTM D-1238||g/10min||8|
|Heat deflection Temperature (1.82MPa)||ASTM D-648||℃||110|
|Tensile Strength||ASTM D-638||MPa||50|
|Flexural Strength||ASTM D-790||MPa||75|
|Flexural Modulus||ASTM D-790||MPa||2100|
|Izod Notched Impact Strength(23℃)||ASTM D-256||J/m||700|
|Izod Notched Impact Strength(-35℃)||ASTM D-256||J/m||200|
|Ball Pressure||IEC 60695-10-2||125℃||PASS|
|Glow wire||IEC 60695-2-13||GWIT:800/3.0||PASS|
Remark: The above laboratory test data are just for reference only; it's not a basis for quality assurance.
Controller shell-gradient bottom
Car seat switch-composite
Dear customers, no need to worry about your products colors, POLYROCKS has professional colour matching department, providing free colour matching service. Any colour requirements, kindly please contact us by email: firstname.lastname@example.org.
POLYROCKS focus on provide prompt pre/after-sales service, we have professional injection molding engineers and technical service engineers to provide accurate information and timely service. Any questions or needs, you are welcome to contact us by email: email@example.com.
Any purchasing questions, welcome to contact our customer service, helps will be provided by them.
Copyright © POLYROCKS CHEMICAL CO., LTD. All Rights Reserved | Sitemap | Powered by
QUICK ENQUIRE FORM
* Indicate Mandatory fields